
Auto response is not possible in this type of calls.
ZONe 01
gr 03
gr 03
m
m
2’’
The name of the zone transmitting the intercom call
appears on the display of the Control Unit receiving
the message.
To talk, press the talk key and hold it down
throughout the transmission.
If the operation could not be initiated for any reason,
a message will appear on the display.
The intercom call will be transmitted while the key is
held down (the maximum duration is 1').
Transmit the intercom call
Transmitting
intercom calls
Call zone/group
information
m
The volume of the intercom call received is the volume programmed in
sections 4.2.4.D. Receive Intercom Calls Volume. To adjust the
volume, use the +/- keys while the intercom call is being received
(when the intercom call is over, the volume setting will be stored in
memory).
Changing the intercom call receipt volume
When the talk
key is released
the operation is
over.
End of the intercom call
Either of the two parties may end the intercom
conversation at any time by pressing the
key.
When said key is held for
, further to canceling
the receipt of the call, the
control unit will switch to “do
not disturb” mode
The maximum duration of an
intercom operation is 3 minutes.
m
If an intercom call is sent to a non-existent group or if
the Control Units are unable to receive intercom calls,
a message will appear on the display. If the intercom
call is delivered it means at least one Control Unit in
the selected group has received the message.
NOTE: It is possible to totally or partially block the
call/auto response process. See 4.2.3.H. Intercom
Call Permissions.
84
4.2.3.D. Communication with the entryphone intercom
Systems with one or several interface units for one or several entryphone intercom units offer the ability to have a speak/listen type conversation with the
person at the door from any of the system's control units, including the option of letting the person in the door. Each entryphone intercom is identified
by a zone address number, a name and a specific buzz tone.
CC-1023ENG-10
Comentários a estes Manuais